Seal Coat Maintenance Services In Kearns, Utah
Asphalt emulsion seal coat that protects and restores Utah parking lots on a 2-year cycle.
Download A Free Asphalt Seal Coat Timing Guide for Commercial Properties
When to seal, why the timing matters, how Utah's climate affects the schedule, and the cost math behind a 2-year maintenance cycle.
Seal Coat Maintenance In Kearns, Utah
We apply seal coat to asphalt surfaces for commercial property managers, HOA communities, and residential customers throughout Utah. Seal coat protects the asphalt binder from UV oxidation — the sun breaks down the oils in asphalt, causing it to become brittle and gray. A properly applied coat of asphalt emulsion sealer slows that process, keeps the surface flexible, and reduces water infiltration. We use asphalt emulsion-based products formulated for Utah conditions. The prep work is what separates a good seal coat job from a poor one: all cracks must be sealed first, oil spots treated, and the surface cleaned before any sealer goes down. We coordinate traffic management with you and typically open the lot in 24–48 hours depending on temperature and drying conditions.
Why Kearns Owners Choose Black Canyon Exteriors
Kearns was developed rapidly after World War II as defense worker housing and retains a high proportion of post-war construction — 800 to 1,200 square foot homes with original brick or stucco exteriors and aluminum gutters that have been patchwork-repaired over decades. The original gutter systems were sized for the modest roof areas of the 1940s originals; many homes have since had additions or covered carports that substantially increase the roof drainage area without corresponding gutter upgrades. The flat valley position means Kearns properties hold standing water in low spots of parking lots and driveways longer than hillside properties, accelerating pavement base failure.
We serve Kearns and nearby communities including Taylorsville, West Valley City, and West Jordan.
Free On-Site Estimate In Kearns
Tell us the property address — we will schedule a walk-through usually within a few business days.
Our Seal Coat Maintenance Process
-
Surface prep and repairs
All cracks are sealed (or we schedule a crack seal service before the seal coat visit). Oil spots are treated with oil-spot primer — sealer will not bond to untreated oil contamination. The surface is blown clean.
-
Edging and masking
We edge along curbs, structures, and any surfaces that should not get sealer. Adjacent concrete, landscaping edges, and building bases are protected.
-
Seal coat application
Asphalt emulsion sealer is applied by squeegee, brush, or spray depending on the surface and specification. Commercial lots typically get two coats for consistent coverage.
-
Traffic hold and cure
Surface needs 24–48 hours to cure before regular vehicle traffic, longer in cool or humid conditions. We coordinate the schedule with you to minimize operational disruption.
Recent Seal Coat Maintenance Work
Proudly Serving All Of Utah
We serve the Wasatch Front and beyond — from Salt Lake County to Utah County, Davis, Weber, Tooele, Summit, and surrounding communities.
- Salt Lake City
- West Jordan
- South Jordan
- Sandy
- Draper
- Provo
- Orem
- Lehi
- American Fork
- Ogden
- Layton
- Bountiful
- West Valley City
- Park City
- Tooele
Ready To Start Your Kearns Project?
Free, written, line-item estimate. No commitment required.
Get In Touch
Ready for a quote or have a question? We’re Utah-based, Utah-run, and we’ll come out to your property for a free on-site estimate.
Get A Free Quote